Vorschaubild nicht verfügbar
Publikationstyp
Wissenschaftlicher Artikel
Erscheinungsjahr
2013
Robin test for the implementation of odour measurements according to DIN ISO 16000-28 into the assessment of emissions from building products
Robin test for the implementation of odour measurements according to DIN ISO 16000-28 into the assessment of emissions from building products
Autor:innen
Herausgeber
Quelle
Gefahrstoffe, Reinhaltung der Luft
73 (2013), H. 10, Seite 441 - 445
73 (2013), H. 10, Seite 441 - 445
Schlagwörter
Zitation
Robin test for the implementation of odour measurements according to DIN ISO 16000-28 into the assessment of emissions from building products, 2013. Gefahrstoffe, Reinhaltung der Luft [online]. Bd. 73 (2013), H. 10, Seite 441 - 445. DOI 10.60810/openumwelt-314. Verfügbar unter: https://openumwelt.de/handle/123456789/9157
Zusammenfassung englisch
Odour measurements become increasingly important in view of the assessment of indoor air quality and the emissions of building products. Hence they need to be implemented into evaluation schemes such as the AgBB scheme. While there are already standards like DIN ISO 16000-28 and VDI 4302 Part 1 specifying the procedure of odour measurements using a comparison scale, no final validation of the method has been carried out so far. Therefore, a round robin test was conducted in 2012 with 12 participating laboratories that mainly consisted of the following two parts: 1) testing of the available comparison scales with respect to their operational performance and 2) execution of an odour assessment of an acrylic sealant using emission test chambers. Part one included the measurement of the air flow rates and the provided concentrations of the reference substance (acetone). Part two was conducted to test the performance of the laboratories and the applicability of DIN ISO 16000-28 and supplementary VDI 4302 Part 1 by assessing the perceived intensity and the hedonic tone of the air samples. Moreover, samples for VOC analysis were taken from the air in the emission test chamber on the 7th day of testing to allow for quality control. Resulting from this round robin test main deficits were detected and suggestions for the improvement of the odour measurement procedure were made.Quelle: Gefahrstoffe - Reinhaltung der Luft, 73(2013)10, S. 441-445