Aufsätze

Dauerhafte URI für die Sammlunghttps://openumwelt.de/handle/123456789/6

Listen

Suchergebnisse

Gerade angezeigt 1 - 5 von 5
  • Veröffentlichung
    Recommendation for a test battery for the ecotoxicological evaluation of the environmental safety of construction products
    (2017) Gartiser, Stefan; Heisterkamp, Ines; Schoknecht, Ute; Ilvonen, Outi
  • Veröffentlichung
    Four selected high molecular weight heterocyclic aromatic hydrocarbons: Ecotoxicological hazard assessment, environmental relevance and regulatory needs under REACH
    (2018) Brendel, Stephan; Einhenkel-Arle, Doreen; Hassold, Enken; Polleichtner, Christian
    Little is known about the ecotoxicity of heterocyclic aromatic hydrocarbons (NSO-HETs) to aquatic organisms. In the environment, NSO-HETs have been shown to occur in a strong association with their unsubstituted carbocyclic analogues, the polycyclic aromatic hydrocarbons (PAH), for which much more information is available. The present study addressed this issue by investigating the toxicity of four selected NSO-HETs in green algae (Desmodesmus subspicatus), daphnids (Daphnia magna) and fish embryos (Danio rerio). The four high molecular weight NSO-HETs dibenz[a,j]acridine (DBA), 7H-dibenzo[c,g]carbazole (DBC), benzo[b]naphtho[2,1-d]thiophene (BNT) and benzo[b]naphtho[1,2-d]furan (BNF) were selected, based on the results of a previous research project, indicating a lack of toxicity data and a high potential for persistence and bioaccumulation. The solubilities of the NSO-HETs in the test media were determined and turned out to be comparatively low (2.7-317ng/L) increasing in the following order: DBA < BNT " DBC " BNF. Exposure concentrations during the toxicity tests were quantified with GC-MS and decreased strongly possibly due to sorption or metabolising during the test periods (48-96 h). Therefore, the estimated effect concentrations were related to the mean measured concentrations, as endpoints related to nominal concentrations would have underestimated the toxicity many times over. Within the range of the substance solubilities, BNF affected all test organisms with fish embryos being the most sensitive (fish: EC50 6.7 ng/L, algae: EC10 17.8 ng/L, daphnids: EC50 55.8 ng/L). DBC affected daphnids (EC50 2.5 ng/L,) and algae (EC10 3.1 ng/L), but not fish embryos. The lowest toxicity endpoint was observed for BNT affecting only algae (NOEC 0.556 ng/L) and neither daphnids nor fish embryos. DBA did not show any effects on the tested organisms in the range of the water solubility. However, we would expect effects in long-term toxicity studies to fish and aquatic invertebrates for all substances at lower concentrations, which needs further investigation. All four NSO-HETs were identified in mussels (Mytilus edulis) from the German coasts, in green kale (Brassica oleracea var. acephala) and in freshwater harbor sediment in concentrations between 0.07 and 2 ng/kg, highlighting their relevance as environmental contaminants. There is a need to regulate the four NSO-HETs within the REACH regulation due to their intrinsic properties and their environmental relevance. However, acquisition of additional experimental data appears to be pivotal for a regulation under REACH. © 2018 The Authors. Published by Elsevier Inc.
  • Veröffentlichung
    Hazard grouping of nanomaterials for daphnia and algae toxicity: lessons learned from scientific projects for regulatory applicability
    (2019) Schwirn, Kathrin; Völker, Doris
    Given the numerous manufactured nanomaterials already on the market and expected in future, the effort for the individual investigation of hazard and risk would be enormous. To overcome this challenge, grouping of nanomaterials has been identified as one critical issue by the European Commission as well as the Organisation for Economic Co-operation and Development (OECD). In that context, several research projects have been carried out to deliver scientific input and develop approaches. This publication discusses experiences from several cases of two scientific projects with the aims to develop and review analogy hypotheses for grouping of different nanoforms of same substances for endpoints related to aquatic ecotoxicity from a regulatory point of view. Furthermore, by presenting examples of grouping attempts, it outlines the need for considerations of further aspects beside key physicalâ€Ìchemical parameters for grouping nanomaterials regarding environmental endpoints. The results substantiate previous educated guesses with strategically collected experimental data on issues that needs to be considered for grouping nanomaterials in regulatory context. Still, grouping of nanomaterials for the aim of joint assessment of ecotoxicity of nanoforms in a regulatory context is in its infants compared to grouping approaches of nanoforms for human health assessment. This publication features important aspects on possibilities and challenges of grouping nanomaterials for environmental hazard assessment. Quelle: https://enveurope.springeropen.com
  • Veröffentlichung
    LogD-based modelling and "Delta"logD as a proxy for pH-dependent action of ionizable chemicals reveal the relevance of both neutral and ionic species for fish embryotoxicity and possess great potential for practical application in the regulation of chemicals
    (2023) Köhler, Heinz R.; Gräff, Thomas; Schweizer, Mona; Maletzki, Dirk; Kühnen, Ute; von der Ohe, Peter C.
    Depending on the ambient pH, ionizable substances are present in varying proportions in their neutral or charged form. The extent to which these two chemical species contribute to the pH-dependant toxicity of ionizable chemicals and whether intracellular ion trapping has a decisive influence in this context is controversially discussed. Against this background, we determined the acute toxicity of 24 ionizable substances at up to 4 different pH values on the embryonic development of the zebrafish, Danio rerio, and supplemented this dataset with additional data from the literature. The LC50 for some substances (diclofenac, propranolol, fluoxetine) differed by a factor of even >103 between pH5 and pH9. To simulate the toxicity of 12 acids and 12 bases, six models to calculate a pH-dependant logD value as a proxy for the uptake of potentially toxic molecules were created based on different premises for the trans-membrane passage and toxic action of neutral and ionic species, and their abilities to explain the real LC50 data set were assessed. Using this approach, we were able to show that both neutral and charged species are almost certainly taken up into cells according to their logD-based distribution, and that both species exert toxicity. Since two of the models that assume all intracellular molecules to be neutral overestimated the real toxicity, it must be concluded, that the toxic effect of a single charged intracellularly present molecule is, on the average, lower than that of a single neutral molecule. Furthermore, it was possible to attribute differences in toxicity at different pH values for these 24 ionizable substances to the respective deltas in logD at these pH levels with high accuracy, enabling particularly a full logD-based model on the basis of logPow as a membrane passage descriptor to be used for predicting potential toxicities in worst-case scenarios from existing experimental studies, as stipulated in the process of registration of chemicals and the definition of Environmental Quality Standards (EQS). © 2023 The Author(s).
  • Veröffentlichung
    Investigating the ecotoxicity of construction product eluates as multicomponent mixtures
    (2023) Heisterkamp, Ines; Gartiser, Stefan; Schoknecht, Ute; Ilvonen, Outi
    Background The release of hazardous compounds from construction products can harm human health and the environment. To improve the sustainability of construction materials, the leaching of substances from construction products and their potential environmental impact should be assessed. Twenty-seven construction products from different product groups were examined with a combination of standardized leaching tests (dynamic surface leaching test and percolation test) and biotests (algae, daphnia, fish egg, luminescent bacteria, umu and Ames fluctuation tests). To identify the released substances, extensive qualitative and quantitative chemical analyses were performed, including gas chromatographic and liquid chromatographic screening techniques. Results Many of the tested eluates caused significant ecotoxic effects. Particularly high ecotoxicities were observed for grouts (lowest ineffective dilution (LID) up to 16384) and cork granules (LID up to 24578). The results of ecotoxicity tests allow the prioritization of the eluates that should be subjected to detailed chemical analyses. Organic screening by different methods and ranking the identified substances based on recorded hazard classification is a suitable approach to identify the relevant toxic substances. Conclusions Determining the ecotoxicity of eluates from construction products records the summary effect of all leachable substances. This instrument is especially useful for construction products of complex and largely unknown composition. The ecotoxicological and the chemical-analytical approach complement each other in an ideal way to characterize the potential hazard of eluates from construction products and to identify the environmentally hazardous components in these eluates. Our results confirm that the proposed harmonized methods for testing eluate toxicity are an adequate and applicable procedure to move toward a more sustainable way of building and to reduce toxic effects of construction products in their use phase in the environment. © The Author(s) 2023