Person: Remus, Rainer
Lade...
E-Mail-Adresse
Geburtsdatum
Forschungsvorhaben
Organisationseinheiten
Berufsbeschreibung
Nachname
Remus
Vorname
Rainer
Name
3 Ergebnisse
Suchergebnisse
Gerade angezeigt 1 - 3 von 3
Veröffentlichung Best Available Techniques (BAT) reference document for the non-ferrous metals industries(Europäische Union. Amt für Veröffentlichungen, 2017) Cusano, Gianluca; Gonzalo, Miguel Rodrigo; Farrell, Frank; Remus, Rainer; Europäische KommissionThe BAT reference document (BREF) entitled 'Non-Ferrous Metals Industries' forms part of a series presenting the results of an exchange of information between EU Member States, the industries concerned, non-governmental organisations promoting environmental protection, and the Commission, to draw up, review and, where necessary, update BAT reference documents as required by Article 13(1) of the Directive 2010/75/EU on industrial emissions. This document is published by the European Commission pursuant to Article 13(6) of the Directive. This BREF for 'Non-Ferrous Metals Industries' concerns the activities specified in Sections 2 and 6.8 of Annex I to Directive 2010/75/EU, namely: - 2.1: Metal ore (including sulphide ore) roasting or sintering; - 2.5: Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; - 6.8: Production of carbon (hard-burnt coal) or electrographite by means of incineration or graphitisation. This document also covers: - the production of zinc oxide from fumes during the production of other metals; - the production of nickel compounds from liquors during the production of a metal; - the production of silicon-calcium (CaSi) and silicon (Si) in the same furnace as the production of ferro-silicon; - the production of aluminium oxide from bauxite prior to the production of primary aluminium, where this is an integral part of the production of the metal; - the recycling of aluminium salt slag. Important issues for the implementation of Directive 2010/75/EU in the non-ferrous metals industries are the emissions to air of dust, metals, organic compounds (which can result in the formation of PCDD/F) and sulphur dioxide; diffuse air emissions; emissions to water of metals (e.g. Hg, Cd, Cu, Pb, Zn); resource efficiency; and the prevention of emissions to soil and groundwater. This BREF contains 12 chapters. Chapters 1 and 2 provide general information on the non-ferrous metals industry and on the common industrial processes and techniques used within the whole sector. Chapters 3, 4, 5, 6, 7, 8, 9 and 10 correspond to the following specific production sectors: copper, aluminium, lead and/or tin, zinc and/or cadmium, precious metals, ferro-alloys, nickel and/or cobalt, and carbon and graphite. For each specific production sector, these eight chapters provide information and data concerning the applied processes and techniques; the environmental performance of installations in terms of current emissions, consumption of raw materials, water and energy, and generation of waste; the techniques to prevent or, where this is not practicable, to reduce the environmental impact of operating installations in these sectors that were considered in determining the BAT; and the emerging techniques as defined in Article 3(14) of the Directive. Chapter 11 presents the BAT conclusions as defined in Article 3(12) of the Directive. Chapter 12 is dedicated to concluding remarks and recommendations for future work. Quelle: BAT-Merkblatt JRC 107041Veröffentlichung Emissionsmessungen von alveolengängigem kristallinen Siliziumdioxid (RCS) an Industrieanlagen(2021) Ehrlich, Christian; Noll, Günter; Lehmann, Christian; Wusterhausen, Ernst; Remus, RainerThe potential risk from human exposure to Respirable Crystalline Silica (RCS) includes a range of serious non-malignant effects as well as lung cancer, which may occur at relatively low levels. In a previous study, investigating several industrial sectors, we found the highest emission levels of RCS in the industrial silica sand operations. 28 different sand processing facilities were examined in two complex emission measurement programmes. A two-stage cascade impactor was used to separate the particle fractions: > 10 Ìm, 10-4 Ìm and < 4 Ìm of aerodynamic diameter. The size of particles of most concern is the so-called particulate matter 4 (PM4). The analytical procedure for determining RCS in emission samples consists of using X-ray diffraction and infrared spectroscopy methods. The relationship between Total Particulate Matter (TPM), PM4 and RCS (as a percentage of PM4) was evaluated. In the case of increased Total Particulate Matter concentration in the stack gas (more than 20 mg/m3) combined with increased percentage of RCS in PM4 an exceedance of an Emission Limit Value (ELV) of 1 mg/m3 is more likely to occur. The evaluation of the emission data helped to formulate differentiated emission control requirements of the plants concerning the draft of the new German Technical Instructions on Air Quality Control (new German TA Luft). It was possible to demonstrate, under which conditions for the specific processing techniques used, emission limits for Total Particulate Matter can be used as a threshold value for the Respirable Crystalline Silica emission. If the mass fraction of quartz in the source rock to be processed is more than 20%, periodic measurements of Respirable Crystalline Silica will be necessary every three years on grinders, whereas they will be only necessary on dryers if the Total Dust concentration exceeds 5 mg/m3. © 2021, VDI Fachmedien GmBH & Co. KG. All rights reserved.Veröffentlichung Die Neufassung der TA Luft(2023) Remus, RainerDie Gründe für die Neufassung der Technischen Anleitung zur Reinhaltung der Luft (TA Luft) und die wesentlichen Änderungen mit den Auswirkungen auf Betreiber und Behörden werden vorgestellt. Die TA Luft ist die zentrale Immissionsschutz-Vorschrift für genehmigungsbedürftige Anlagen und enthält u. a. Vorsorgeanforderungen gegen schädliche Umwelteinwirkungen durch Luftverunreinigungen. Sie ist im Genehmigungsverfahren bei Neuanlagen und bei wesentlichen Änderungen sowie bei der Sanierung bestehender Anlagen anzuwenden. © Springer Fachmedien Wiesbaden GmbH