Person:
Bandow, Nicole

Lade...
Profilbild
E-Mail-Adresse
Geburtsdatum
1980
Forschungsvorhaben
Berufsbeschreibung
Nachname
Bandow
Vorname
Nicole
Name

Suchergebnisse

Gerade angezeigt 1 - 10 von 15
  • Veröffentlichung
    Umweltprobenbank des Bundes
    (Umweltbundesamt, 2022) Badry, Alexander; Bandow, Nicole; Fettig, Ina; Körner, Andrea; Koschorreck, Jan; Künitzer, Anita; Nagorka, Regine; Rüther, Maria; Weber, Till; Wellmitz, Jörg; Deutschland. Umweltbundesamt
    Dieser Bericht fasst die wesentlichen Arbeiten der Umweltprobenbank des Bundes im Jahr 2020 zusammen. Die Umweltprobenbank des Bundes unterstützt die Umsetzung des Vorsorgeprinzips mit einer wissenschaftlichen Infrastruktur, einer umfassende Datenbasis zur Bestimmung und Bewertung des Ist-Zustandes der Umwelt und einer langfristigen Beobachtung der in der Umwelt stattfindenden chemischen, physikalischen und biologischen Entwicklungsprozesse. Dafür sammeln Fachleute Humanproben ausgewählter Standorte gemeinsam mit ökologisch repräsentativen Umweltproben, archivieren sie bei tiefkalten Temperaturen und führen Untersuchungen auf gesundheits- und umweltrelevante Stoffe durch. Auf diese Weise wird auch eine Kontrolle der Wirksamkeit umweltpolitischer Maßnahmen möglich, beispielsweise bei Beschränkungen der Verwendung von Stoffen. Quelle: www.umweltbundesamt.de
  • Veröffentlichung
    Validation of European horizontal methods for the analysis of PAH, PCB and dioxins in sludge, treated biowaste and soil
    (2019) Kalbe, Ute; Bandow, Nicole; Lehnik-Habrink, Petra
    Background
    Draft standards for the determination of organic pollutants in the solid matter of environmental matrices such as sludge, treated biowaste and soil have been basically developed in the framework of the European standardisation project HORIZONTAL. A research project financed by the German Federal Environment Agency was initiated to finalise some of these CEN standard drafts, since fully validated standard procedures are crucial for the evaluation of their reliability in the context of implementation in legislation on environmental health.

    Approach
    Appropriate test materials (<2 mm particle size) were prepared and homogenised from contaminated soils, sludge and treated biowaste containing polycyclic aromatic hydrocarbons (PAH), polychlorinated biphenyls (PCB), dioxins, furans and dioxin-like-PCB and served, along with reference solutions, as the basis for international interlaboratory comparisons. Performance data of three analytical standard procedures were obtained by the statistical evaluation of results received from 11 to 29 participants per test material.

    Results
    The overall variation coefficients of reproducibility (between-lab standard deviations) for the sum parameters were roughly between 10 and 35%. The variation coefficients of repeatability (within-lab standard deviations) range between 3 and 8% and show no trend considering the substance groups or matrices. The highest coefficients of reproducibility were found for the analysis of PAH, which were between 26 and 35%, depending on the matrix, whereas 7-17% reproducibility was observed for toxicity equivalents (TEQ) comprising dioxins, furans and dl-PCB.

    Conclusions
    Overall, the results confirm that the procedures described in the Technical Specifications are fit for purpose for all three matrices and that the feasibility of the HORIZONTAL approach, to cover several matrices with one standard per analyte, was thereby proven. Quelle: https://enveurope.springeropen.com

  • Veröffentlichung
    Long-term data for PFAS in soils from German ecosystems, including TOP assay
    (2023) Bandow, Nicole; Koschorreck, Jan; Wellmitz, Jörg
    In this study, soil top layers from the German Environmental Specimen Bank (ESB) covering a period from 2002 to 2018 and 11 sampling sites representing four ecosystem types were analysed for 24 PFAS (11 PFCA, 7 PFSA, and 6 precursors), including the total oxidizable precursor (TOP) assay. Median (Sigma)PFAS levels before and after TOP assay ranged from 0.31 to 19.7 (micro)g/kg dry weight (dw) and 0.32 to 20.4 (micro)g/kg dw, respectively. The most frequently measured PFAS above LOQ were PFOS and PFOA, which were present at concentrations above 0.1 (micro)g/kg dw in each sample. Both accounted, on average, for half to two-thirds of the total identified PFAS load at most sites. The investigated samples from the near-natural and forestry ecosystem types each had significantly higher PFAS levels than those from the urban-industrial ecosystem type, while samples from the agricultural ecosystem type did not differ distinctly from the others. Increases of median ΣPFAS levels after TOP assay ranged up to slightly >20 %, indicating that precursor compounds do not play a major role in the substance spectrum of German ESB soil samples from different ecosystem types. Total organic carbon (TOC) content in analysed samples ranged from about 1 % in sandy soil to >40 % in litter layer and showed a strong positive correlation with PFAS concentrations. It is therefore highly recommended that TOC content is reported along with PFAS levels in soils. PFAS trend analysis for nine sampling sites before and after TOP assay showed that concentration levels at most sites have remained more or less stable for the sampled period of almost two decades. The constant PFAS levels in soil samples indicate that PFOS and PFOA regulations have not yet had a positive effect on the exposure situation in this environmental compartment. ©2023 The Authors.
  • Veröffentlichung
    Using environmental simulations to test the release of hazardous substances from polymer-based products: Are Rrealism and pragmatism mutually exclusive objectives?
    (2020) Aitken, Michael D.; Bandow, Nicole; Geburtig, Anja
    The potential release of hazardous substances from polymer-based products is currently in the focus of environmental policy. Environmental simulations are applied to expose such products to selected aging conditions and to investigate release processes. Commonly applied aging exposure types such as solar and UV radiation in combination with water contact, corrosive gases, and soil contact as well as expected general effects on polymers and additional ingredients of polymer-based products are described. The release of substances is based on mass-transfer processes to the material surfaces. Experimental approaches to investigate transport processes that are caused by water contact are presented. For tailoring the tests, relevant aging exposure types and release quantification methods must be combined appropriately. Several studies on the release of hazardous substances such as metals, polyaromatic hydrocarbons, flame retardants, antioxidants, and carbon nanotubes from polymers are summarized exemplarily. Differences between natural and artificial exposure tests are discussed and demonstrated for the release of flame retardants from several polymers and for biocides from paints. Requirements and limitations to apply results from short-term artificial environmental exposure tests to predict long-term environmental behavior of polymers are presented. Source: https://www.mdpi.com
  • Veröffentlichung
    Digging deep - implementation, standardisation and interpretation of a total oxidisable precursor (TOP) assay within the regulatory context of per- and polyfluoroalkyl substances (PFASs) in soil
    (2022) Göckener, Bernd; Bandow, Nicole; Lange, Frank Thomas; Biegel-Engler, Annegret; Lesmeister, Lukas
    Over the past decades, thousands of different per- and polyfluoroalkyl substances (PFASs) have been produced and applied in various industrial processes and consumer products. Their structural diversity has reached a level that cannot be covered by classical target screening methods for individual compounds. Large-scale contaminations of soil, however, require the need to adapt new analytical methods that can describe a contamination more comprehensively. While sum parameters such as the total oxidisable precursor (TOP) assay have been developed in the past years, they are not yet applied in the regulatory context of PFASs. In this commentary, we provide an overview on different approaches of the TOP assay as well as its benefits and disadvantages to other sum parameters for PFASs in soil samples. Furthermore, we elaborate its opportunities and its challenges that need to be tackled to implement the TOP assay as a regulatory tool. With several different approaches of the TOP assay being available, a sound and standardised method needs to be agreed upon and more research is necessary to better describe the method. Although the complexity of PFAS contaminations in soil cannot be fully covered by any analytical method alone, the TOP assay can provide valuable data to detect and characterise soil contamination as an inventory for subsequent remediation measures. Therefore, the TOP assay should be implemented as a useful tool both in research and in the regulatory context of PFASs. © The Author(s) 2022.
  • Veröffentlichung
    Beregnete Bauteile und Bauprodukte: Entwicklung von Vergabegrundlagen für den Blauen Engel mit Hilfe von Auslaugtests
    (2018) Bandow, Nicole; Jürgens, Frederike; Schoknecht, Ute; Bundesanstalt für Materialforschung und -prüfung
    Auslaugversuche wurden mit verschiedenen Bauprodukten durchgeführt, die unter Anwendungsbedingungen mit Niederschlägen in Kontakt kommen können. In das Testprogramm wurden Lacke für Außenanwendungen, Wärmedämmverbundsysteme, Dachziegel und polymere Dachfolien einbezogen. Mit diesen Produkten wurden der von CEN TC 351 entwickelte dynamische Oberflächenauslaugtest (DSLT) und Immersionstests nach EN 16105 durchgeführt. Emissionsverläufe wurden sowohl für anorganische Komponenten als auch für organische Substanzen in den Eluaten ermittelt. Auslaugbare organische Substanzen wurden zuvor in Screeningtests identifiziert. Um die mögliche Freisetzung von Stoffen aus Bauprodukten beurteilen zu können, ist es erforderlich, Emissionsverläufe zu beschreiben. Dazu sind die verwendeten Testverfahren geeignet. Um Bauprodukte mit einem Blauen Engel als "Produkte mit geringer Auslaugung" auszuloben, müssen die auslaugbaren Substanzen komplett bekannt sein. Für organische Verbindungen ist das noch eine Herausforderung. Außerdem erfordert die Bewertung der Testergebnisse sowohl Übertragungsmodelle, die Vorhersagen über freisetzbare Stoffmengen unter Anwendungsbedingungen ermöglichen, als auch Vorgaben zu tolerierbaren Umweltkonzentrationen. Hier besteht noch Handlungsbedarf. Quelle: Forschungsbericht
  • Veröffentlichung
    Umweltverträglichkeit von Kunststoffbelägen auf Sportfreianlagen
    (Sportverlag Strauß, 2016) Kalbe, Ute; Bandow, Nicole; Susset, Bernd
    Dieses Buch ist die Fortstzung des 2012 ebenfalls in der Schriftenreihe des Bundesinstituts für Sportwissenschaft (2012,02) erschienenen Berichts zum Thema "Umweltverträglichkeit von Kunststoff- und Kunststoffrasenbelägen auf Sportfreianlagen". Bei der ersten Untersuchung lag der Focus auf der Entwicklung von Testmethoden im Labormaßstab, die eine Bewertung des Schadstoffaustrags und des möglichen Gefahrenpotentials für Mensch und Umwelt ermöglichen. Folgerichtig setzte sich das aktuelle Projekt nun mit der Modellierung der Stofffreisetzung auseinander. Diese ist Voraussetzung für eine Bewertung der Boden- und Grundwasserverträglichkeit der untersuchten Sportbodensysteme. Dieses Buch ist die Fortstzung des 2012 ebenfalls in der Schriftenreihe des Bundesinstituts für Sportwissenschaft (2012,02) erschienenen Berichts zum Thema "Umweltverträglichkeit von Kunststoff- und Kunststoffrasenbelägen auf Sportfreianlagen". Bei der ersten Untersuchung lag der Focus auf der Entwicklung von Testmethoden im Labormaßstab, die eine Bewertung des Schadstoffaustrags und des möglichen Gefahrenpotentials für Mensch und Umwelt ermöglichen. Folgerichtig setzte sich das aktuelle Projekt nun mit der Modellierung der Stofffreisetzung auseinander. Diese ist Voraussetzung für eine Bewertung der Boden- und Grundwasserverträglichkeit der untersuchten Sportbodensysteme. Quelle: Verlagsinformation
  • Veröffentlichung
    Polychlorinated biphenyls (PCB) and organochlorine pesticides (OCP) in blood plasma - results of the German environmental survey for children and adolescents 2014-2017 (GerES V)
    (2020) Bandow, Nicole; Conrad, André; Kolossa-Gehring, Marike; Murawski, Aline; Sawal, George
    The German Environmental Survey for Children and Adolescents 2014-2017 (GerES V) investigated the current internal exposure to polychlorinated biphenyls (PCB) and organochlorine pesticides (OCP). These analyses were carried out for a population-representative sub-sample of 1135 children and adolescents (aged 3-17 years) of all 2394 GerES V participants. Blood plasma samples were analyzed for seven indicator PCB (PCB 28, PCB 52, PCB 101, PCB 118, PCB 138, PCB 153 and PCB 180) and selected OCP (hexachlorobenzene, three hexachlorocyclohexane isomers, 4,4'-DDT, 4,4'-DDD and 4,4'-DDE). Despite risk mitigation measures and bans put into force some decades ago children and adolescents living in Germany are still exposed to PCB and OCP: Highest geometric mean plasma concentrations were measured for 4,4'-DDE (0.158 g/L), followed by PCB 138 (0.049 g/L), PCB 153 (0.066 g/L) and PCB 180 (0.032 g/L). Different application patterns of compounds between former East and former West Germany are still reflected by differences in plasma concentrations. Significant differences between age groups and by sexes were found. Moreover, the influence of breastfeeding and fish consumption, which was also found in other studies, was confirmed. Comparison with the results of GerES 2003-2006 confirms a decreasing trend in blood samples observed world-wide. Currently, health-based guidance values for PCB are still exceeded, though to a very limited extent. Also, the widespread occurrence of these compounds underlines the need for further monitoring of these compounds in humans although they are no longer marketed. Quelle: https://www.sciencedirect.com
  • Veröffentlichung
    Evaluation of the impact of construction products on the environment by leaching of possibly hazardous substances
    (2018) Bandow, Nicole; Gartiser, Stefan; Ilvonen, Outi
    Construction products are in contact with water (e.g., rain, seepage water) during their service lifetime and may release potentially harmful compounds by leaching processes. Monitoring studies showed that compounds attributed to construction products are found in storm water and the receiving bodies of water and that the release of biocides in urban areas can be comparable to the input of pesticides from agricultural uses. Therefore, a prospective risk assessment of such products is necessary. Laboratory leaching tests have been developed by the Technical Committee CEN/TC 351 and are ready to use. One major task in the future will be the evaluation of the leaching test results, as concentrations found in laboratory experiments are not directly comparable to the field situations. Another task will be the selection of compounds to be considered for construction products, which are often a complex mixture and contain additives, pigments, stabilization agents, etc. The formulations of the products may serve as a starting point, but total content is a poor predictor for leachability, and analysis of the eluates is necessary. In some cases, non-targeted approaches might be required to identify compounds in the eluates. In the identification process, plausibility checks referring to available information should be included. Ecotoxicological tests are a complementary method to test eluates, and the combined effects of all compounds-including degradation products-are included. A bio test battery has been applied in a round robin test and was published in a guidance document. Published studies on the ecotoxicity of construction products show the tests' suitability to distinguish between products with small and larger effects on the environment. Quelle: https://link.springer.com
  • Veröffentlichung
    Influence of flow rate and particle size on local equilibrium in column percolation tests using crushed masonry
    (2019) Bandow, Nicole; Finkel, Michael; Grathwohl, Peter
    Column leaching tests are frequently used and accepted for investigation of release of hazardous substances from solid materials. Independent of differences due to the field of application or national regulations, column tests assume that local equilibrium is established in the experiment which facilitates transfer of results to field conditions. In the process of harmonization and standardization within Europe the question on the influence of flow rate and grain size distribution on the local equilibrium was raised. Thus, a set of experiments using two different masonry materials with varying grain size distribution and flow rate were conducted including stop/flow experiments. Results are compared to a numerical model which takes intraparticle pore diffusion-controlled release of Mo and V into the percolating water into account. Due to the relatively high intraparticle porosity of the materials (24-29%) data and model indicate that initially equilibrium-state conditions prevail followed by rapidly decreasing concentrations. The model fits data for Mo and V reasonably well; however, after the initial decline of concentrations (at L/S>2) extended tailing is observed especially of elements occurring as oxides, which is not captured by the model. © 2020 Springer Nature Switzerland AG